Satellite Photo Overlay; Animation Overlay - Furuno MFD12 Operator's Manual

3. 3D Display, Overlays
3.2.3

Satellite Photo Overlay

You can put the satellite photo for your area on the 2D and 3D displays. Use the Ro-
toKey to select [Overlay] and [Sat Photo] then push the RotoKey to show or hide the
satellite photo
High-resolution satellite images for the USA coastline are not provided standard, but
are available at no cost (except shipping and handling). Users can install multiple sat-
ellite photos on the hard drive of the NavNet 3D. The illustration below shows the vec-
tor chart with the satellite photo overlay.
How to set photo transparency on water
You can set the level of transparency for the satellite photo on the water. Open the
[Chart-General] menu. Use the RotoKey to select [Photo Transparency on Water]
then push the RotoKey. Rotate the RotoKey to set the transparency level with the
slider bar then push the key to validate the setting. You can see the results of the set-
ting on the screen.
3.2.4

Animation Overlay

This overlay displays predicted wind, waves, or barometer information for a three-day
period in three-hour intervals. The source for this overlay can be US NOWRAD or
CAN NOWRAD. Select the source with [Weather Radar] on the [Weather-Sirius]
menu. Long-push the RotoKey, select [Animate] then push the RotoKey to activate
or deactivate the animation overlay.
3-10