Far-2107 Radar Series And Navnet 3D - Furuno MFD12 Operator's Manual

6. Radar
6.25

FAR-2107 Radar Series and NavNet 3D

The FAR-2107 radar series (program no. 02.50 and after, C specification) can be con-
nected to your NavNet 3D, and some functions can be controlled from the NavNet 3D.
The table shown below shows which features can be controlled from the NavNet 3D.
Note that you should turn off Guard Polygon at the radar to control the radar from the
NavNet 3D.
Function
AIS data (LAN)
AIS data (NMEA 0183)
AIS data display
ARPA acquisition,
cancellation
Auto Gain
Auto Rain
Auto Sea
Automatic ARPA target ac-
quisition
Dual range mode
Gain
Installation setting (tuning,
antenna rotation speed,
etc.)
Manual ARPA target acqui-
sition, cancel
Position, time data
Range scale
Selection of range unit
Source selection, picture
display
TX/STBY
Watchman
6-24
Controllable from
NavNet
No
No
Yes
Yes
No
No
Yes
No
No
Yes
No
Yes
Yes
Yes
No
Yes
Yes
No
Remarks
Value of Auto Sea is "0".
Manual only
Max. no. of targets is 100.
Shared via LAN
0.0625, 1, 2, 4, 8, 16, 32, 36, 64,
72, 120 not available with IMO
specification. 72 nm not available
with C specification.
Fixed at "NM"