10.3
How to Select an Instrument Display
You can show engine, steering, wind or wind/weather
data in the instrument display if you have the related sen-
sors. Select the data to display as follows:
1. Activate the instrument display then push the CTRL
key to select the instrument display with the yellow
cursor.
2. Push the RotoKey to show the soft controls that se-
lect an instrument display.
3. Rotate the RotoKey to select a display then push the
key to validate your selection.
10.4
Instrument Displays
10.4.1
Steering Display
The steering display provides the analog and digital indications shown below.
• Heading
• Direction to steer
• Cross-track error
• Distance to destination waypoint
• Time To Go to destination waypoint
• Estimated Time of Arrival at destination waypoint
• Course over ground
Course marker
(red)
Course over ground
Heading (blue line)
Steer to direction marker (green)
Direction to steer
Heading
(right, starboard; left, port)
10. Instrument Display
Steer to
direction
Cross-track
error
Distance to
destination waypoint
Time To Go to
destination waypiont
Estimated Time
of Arrival at
destination waypoint
10-3