How To Select The Operating Mode - Furuno NavNet TZtouch3 TZT9F Operator's Manual

How to select the operating mode

How to select the operating mode
The fish finder is available in automatic and manual operation. For automatic operation, gain, clutter and
TVG are automatically adjusted.
Open the Layers
menu, tap the
[Fish Finder] tab.
Manual mode
How to change the range How to change the range
Open the Layers
menu, tap the
[Fish Finder] tab.
How to adjust the gain How to adjust the gain
Open the Layers
menu, tap the
[Fish Finder] tab.
LF Gain
50
(Gain can also be adjusted by
tapping the slider bar.)
How to reduce clutter How to reduce clutter
Tap
LF Gain
LF TVG
Drag the slider bar
to set the gain.
Tap
Auto
mode
Manual
mode
Pinch screen.
Increase
OFF
range
Decrease
range
(Tap [+], [-] icon at left edge
of screen.)
HF Gain
HF TVG
For dual frequency transducer
Tap
(Top right corner)
Clutter
The larger the value, the
more the clutter is reduced.
(Clutter can also be adjusted from the
Layers menu, [Fish Finder] tab.)
12 12
Tap
OR
Tap
Tap
Tap
Tap
LF Gain
Tap
HF Gain
Tap