2.11.9
How to Find Information About a Track
Simple track information provides the depth and temperature for the location selected
on a track. (Depth and temperature sensors are required.) Put the cursor on any part
of a track to get this information.
Detailed track information includes simple track information plus the information
shown below. Press the left-click button to show detailed track information.
• Name of the track
• The time the track was started
• The time the selected point on the track was made
• Position at the selected location
• Depth and temperature at the position selected
Simple track information
2.11.10 Track Pop-up Menu
The Track pop-up menu provides access to the track functions shown below. To show
the Track pop-up menu, put the cursor on a track and press the right-click button.
• Clear a track
• Save a track
• Set track
• Use the trackback feature
Trackback
The trackback feature creates a route with your current track, and saves the track as
a route, under the youngest empty route number. This feature helps you return along
a previous track to get lobster pots, crab pots, and the like.
To use the trackback feature, put the cursor on a track and press the right-click but-
ton to open the Track pop-up menu. Trackback is selected then push the RotoKey.
The trackback starts as shown below.
• A red dashed line runs between your vessel and the destination.
• A blue solid line connects between route points (automatically created) and your
vessel.
Go to most recent track point.
Save track.
Clear track.
Open Ship & Track menu.
Detailed track information
2. Chart Plotter
2-23