Redial A Number From Your Analog Phone; Answer A Call On Your Analog Phone; Answer Call Waiting On Your Analog Phone; Put A Call On Hold On Your Analog Phone - Cisco ATA 191 User Manual

Redial a Number from Your Analog Phone

Redial a Number from Your Analog Phone
Procedure
Step 1 Pick up the handset and check for a dial tone.
Step 2 Dial * then #.

Answer a Call on Your Analog Phone

Procedure
When your analog phone rings, pick up the handset to answer the call.

Answer Call Waiting on Your Analog Phone

When you're on an active call, you know that a call is waiting when you hear a single beep.
Procedure
Step 1 Perform a hook flash to speak with another caller who is calling you.
You connect to the second caller and put the first caller on hold.
Step 2 (Optional) To speak with the first caller, perform a hook flash again.
Subsequent hook flashes toggle you between the two callers. You can't create a conference this way.

Put a Call on Hold on Your Analog Phone

You can put an active call on hold and then resume the call when you're ready.
Procedure
Step 1 While on an active call, perform a hook flash.
Your call is put on hold.
Step 2 To return to the call, either:
• Perform another hook flash.
• Go on hook (hang up) and pick up when your phone rings.
Cisco ATA 191 User Guide for Cisco Unified Communications Manager
16
Calls