Sslv2 Enable; Sslv3 Enable - Cisco CSS11501S-C-K9 Configuration Manual

Configuration Command Set
Usage Guidelines
Related Commands

sslv2 enable

Usage Guidelines
Related Commands

sslv3 enable

Usage Guidelines
Cisco 11000 Series Secure Content Accelerator Configuration Guide
C-134
Availability: Serial, Telnet; FIPS Mode (serial only)
session-cache enable (Backend Server Configuration Mode)
session-cache size (Backend Server Configuration Mode)
Enables SSL version 2 protocols.
sslv2 enable
no sslv2 enable
Availability: Serial, Telnet
Using the no form of the command disables SSL version 2 protocols. You cannot
disable SSL version 2 and 3 and TLS protocols. This command is not available in
FIPS mode.
sslv3 enable (Backend Server Configuration Command Set)
tlsv1 enable (Backend Server Configuration Command Set)
Enables SSL version 3 protocols.
sslv3 enable
no sslv3 enable
Availability: Serial, Telnet
Using the no form of the command disables SSL version 3 protocols. You cannot
disable SSL version 2 and 3 and TLS protocols. This command is not available in
FIPS mode.
Appendix C Command Summary
78-13124-06