Table C-14 Server Configuration Command Description - Cisco CSS11501S-C-K9 Configuration Manual

Appendix C Command Summary
Table C-14 Server Configuration Command Description
Command
activate, page 165
cert, page 165
certgroup chain, page 166
certgroup clientauth,
page 167
clientauth enable, page 167
clientauth error, page 168
clientauth verifydepth,
page 169
end, page 170
ephemeral error, page 170
ephrsa, page 171
exit, page 171
finished, page 171
help, page 172
httpheader, page 172
78-13124-06
Description
Activates the current logical secure server if enough
information has been configured.
Sets the specified certificate for use by the server.
Enables the specified certificate group to be used as
a certificate chain.
Assigns a certificate group to be used as a certificate
trust list for client certificate authentication.
Enables client certificate authentication.
Specifies the client certificate authentication errors
to ignore.
Specifies the level of certificate within the certificate
group to use when verifying client certificates.
Exits Server Configuration mode, activates all
changes, and returns to SSL Configuration mode.
Specifies device behavior when an error is caused by
a client attempting to attach to a server that does not
have ephemeral RSA enabled.
When an export browser version connects to a server
using 1024-bit keys, this allows the RSA key
exchange (the SSL handshake) to be negotiated
using a dynamically created 512-bit key. Using
ephemeral RSA ensures the device complies with
United States commerce laws.
Exits Server Configuration mode, activates all
changes, and returns to SSL Configuration mode.
Leaves Server Configuration Mode and returns to
Top Level mode.
Displays help information for the specified
command.
Specifies the header information to pass to hardware
servers.
Cisco 11000 Series Secure Content Accelerator Configuration Guide
Command Listing
C-27