Secpolicy - Cisco CSS11501S-C-K9 Configuration Manual

Configuration Command Set
Usage Guidelines
Related Commands

secpolicy

Syntax Description
Usage Guidelines
Related Commands
Cisco 11000 Series Secure Content Accelerator Configuration Guide
C-130
Availability: Serial, Telnet; FIPS Mode (serial only)
localport (Backend Server Configuration Command Set)
Creates an association between this server and the specified security policy.
secpolicy <polname|all|default|fips|noexport56|strong|weak>
polname
all
default
fips
noexport56
strong
weak
Availability: Serial, Telnet; FIPS Mode (serial only)
Several default security policies are preloaded into the SSL device. To see a list
of all loaded default and user-defined security policies, use the show ssl secpolicy
command.
secpolicy (SSL Configuration Command Set)
show ssl secpolicy (Non-Privileged Command Set)
See the section "Security Policy Configuration Command Set".
The name of the configured security policy.
All pre-loaded security policies.
Default security policy set.
FIPS 104-2-compliant security policy set.
Security policy set used to address potential problems
in non-US installations using Internet Explorer. While
this security policy disables the 56-bit cipher suite, it
does not compromise the strength or the integrity of
the encryption in any way.
Strong security policy set.
Weak security policy set.
Appendix C Command Summary
78-13124-06