Configuration Command Set
Usage Guidelines
Related Commands
localport
Syntax Description
Usage Guidelines
Related Commands
log-url
Cisco 11000 Series Secure Content Accelerator Configuration Guide
C-178
Availability: Serial, Telnet; FIPS Mode (serial only)
Only one key is allowed per server. If you enter this command with a different key,
that reference replaces the earlier one.
key(SSL Configuration Command Set)
show ssl key (Non-Privileged Command Set)
See also "Key Configuration Command Set".
Specifies the port on which the secure server receives SSL traffic. The SSL traffic
is decrypted and sent to the real server using the TCP service port previously
specified with the remoteport command.
localport <port|default>
port
default
Availability: Serial, Telnet; FIPS Mode (serial only)
remoteport (Server Configuration Command Set)
sslport (Server Configuration Command Set)
Specifies a host for logging of URL requests.
log-url <ipaddr> [port <portid>] [facility <facilityid>]
no log-url <ipaddr>
The TCP service port through which SSL traffic is
received by the current secure logical server.
Returns the setting to the default of 443.
Appendix C
Command Summary
78-13124-06