Telnet; Command Listing - Cisco CSS11501S-C-K9 Configuration Manual

Command Listing

Note

Telnet

Command Listing
Cisco 11000 Series Secure Content Accelerator Configuration Guide
C-10
When prompted to supply a file name during serial management, you
must supply it as a URL in the form of HOST/PATH/FILENAME
using the http://, https://, ftp://, or tftp:// prefix.
After you have assigned an IP address to the Cisco Secure Content Accelerator
using the serial connection configuration manager, you can connect to the
appliance via telnet.
Initiate a telnet session with the IP address previously assigned to the
1.
appliance.
An SCA> prompt is displayed.
2.
When prompted to supply a file name during a telnet
Note
management session, you must supply it as a URL in the
form of HOST/PATH/FILENAME using the http://, https://,
ftp://, or tftp:// prefix.
The following tables present all commands available for the device.
Non-Privileged Command Description
•
Privileged Command Description
•
• Configuration Command Description
Interface Configuration Command Description
•
SSL Configuration Command Description
•
• Backup-Server Configuration Command Description
Certificate Configuration Command Description
•
Certificate Group Configuration Command Description
•
• Key Configuration Command Description
Appendix C Command Summary
78-13124-06