Table of Contents
Advertisement
Appendix C
Command Summary
snmp contact
Syntax Description
Usage Guidelines
Related Commands
snmp default community
78-13124-06
Assigns contact information for the SNMP subsystem. Use the no form of the
command to remove the contact information.
snmp contact <contactInfo>
no snmp contact
contactInfo
Availability: Serial, Telnet; FIPS Mode (serial only)
no snmp (Configuration Command Set)
show snmp (Non-Privileged Command Set)
snmp access-list (Configuration Command Set)
snmp default community (Configuration Command Set)
snmp enable (Configuration Command Set)
snmp location (Configuration Command Set)
snmp trap-host (Configuration Command Set)
snmp trap-type enterprise (Configuration Command Set)
snmp trap-type generic (Configuration Command Set)
Assigns a default community for the SNMP subsystem to use when sending
trapping information.
snmp default community <comName>
no snmp default community
Cisco 11000 Series Secure Content Accelerator Configuration Guide
The string containing the contact information. Contact
information must be entered within quotes.
Configuration Command Set
C-97
Advertisement
Table of Contents
Troubleshooting
