Mode One-Port; Mode Pass-Thru; Password - Cisco CSS11501S-C-K9 Configuration Manual

Configuration Command Set

mode one-port

Usage Guidelines

mode pass-thru

Usage Guidelines

password

Cisco 11000 Series Secure Content Accelerator Configuration Guide
C-92
Enables secure and non-secure traffic to pass through the single "Network"
Ethernet port.
mode one-port
no mode one-port
Availability: Serial; FIPS Mode (serial only)
Use the no form of the command to return the device to dual-port mode.
Note Though completers and help information are available in all
management options, the command is only valid via serial
management.
Enables pass through of non-SSL traffic. This is the default configuration.
mode pass-thru
no mode pass-thru
Availability: Serial, Telnet; FIPS Mode (serial only)
Use the no form of the command to block non-SSL traffic pass through.
Sets the access- or enable-level password for the current device or sets the idle
timeout period.
password <access | enable | idle-timeout <minutes>>
no password <access | enable>
no password idle-timeout
Appendix C Command Summary
78-13124-06