Ip Route Default; Keepalive-Monitor - Cisco CSS11501S-C-K9 Configuration Manual

Appendix C Command Summary

ip route default

Syntax Description
Usage Guidelines
Related Commands

keepalive-monitor

Syntax Description
Usage Guidelines
Related Commands
78-13124-06
Sets the default route for the current device.
ip route default <ipaddr>
no ip route default
ipaddr
Availability: Serial, Telnet; FIPS Mode (serial only)
Use the no form of the command to clear the IP address for the default router.
ip address (Configuration Command Set)
Indicates that SSL errors from the specified IP address are to be ignored.
keepalive-monitor <ipaddr>
no keepalive-monitor <ipaddr>
ipaddr
Availability: Serial, Telnet; FIPS Mode (serial only)
Up to two IP addresses, set individually, are allowed.
show keepalive-monitor (Non-Privileged Command Set)
Cisco 11000 Series Secure Content Accelerator Configuration Guide
The IP address of the default router to use.
The source IP address from which SSL errors are to be
ignored.
Configuration Command Set
C-91