General Configuration Examples; Example: Setting The Device Name (Hostname) - Cisco CSS11501S-C-K9 Configuration Manual

Chapter 5 Graphical User Interface Reference

General Configuration Examples

Note

Example: Setting the Device Name (Hostname)

78-13124-06
SSL: View SSL status and statistics and configure SSL (secure) servers,
•
private keys, certificates, certificate chains, and security policies
SNMP: View and configure SNMP traps and parameters
•
Additionally, a Logout button allows you to log out of the system at any time
when an enable password has been set.
The following examples demonstrate how to use the GUI to configure general
Secure Content Accelerator settings.
To save time, make all the changes you wish, then click Save to
Flash to write the configuration to the device flash memory.
Follow these steps to change the hostname of the device to myDevice.
1. Click General to activate the General content tabs.
Click the Settings tab. The Settings page opens, as shown in Figure 5-3
2.
Type "myDevice" in the Device Name text box.
3.
Cisco 11000 Series Secure Content Accelerator Configuration Guide
General Configuration Examples
5-7