Specifications; Functional Safety Standards And Performance - Danfoss iC7 Series Operating Manual

Operating Guide | iC7-Automation Functional Safety
Table 39: Group 0x61FF
(continued)
Number Name
4652 Parameterization step
failed
4730 Information

Specifications

4.11

Functional Safety Standards and Performance

4.11.1
All safety functions in the iC7 frequency converters meet the requirements of the standards listed in this chapter.
Table 40: Functional Safety Standards and Performance
Directive or Standard
European Union directives
Safety standards
Safety function
56 | Danfoss A/S © 2024.08
Functional Safety for Frequency Converters, Upgradable (+BEF2)
Cause
An attempt to change safety parameters
failed.
Additional information from the advanced
safety unit. See details.
Machinery Directive (2006/42/EC)
EMC Directive (2014/30/EU)
Low Voltage Directive (2014/35/EU)
Safety of Machinery
Functional Safety
Solution
Check if there is any detailed information
in MyDrive® Insight.
Make sure that the requested safety para-
meter change is valid.
Check that the drive system does not have
any unrelated special conditions, such as
software update or drive commissioning,
active.
Try restarting the drive system.
If the problem persists, contact Danfoss
customer support.
The safety module has raised an indica-
tion that needs to be informed to the user.
Further details can be found via the My-
Drive® Insight event details.
Version
EN ISO 13849-1:2015,
EN ISO 13849-2:2012
EN IEC 61800-5-2:2007
EN IEC 61800-3:2018 – second environ-
ment
EN IEC 61326-3-1:2017
EN IEC 61800-5-1:2017
EN ISO 13849-1:2015, IEC 60204-1:2018
IEC 61508-1:2010, IEC 61508-2:2010,
IEC61508-3:2010, EN IEC 61800-5-2:2017
EN IEC 61800-5-2:2017 Safe Torque
Off (STO), Safe Stop 1 (SS1-t)
IEC 60204-1:2018 Stop Category 0, Stop
Category 1
AQ319741840653en-000401 / 136R0268