Mydrive® Insight; Installing Mydrive® Insight; Backing Up And Restoring Parameters; Performing A Factory Reset - Danfoss iC7 Series Operating Manual

Operating Guide | iC7-Automation Functional Safety
1 Ethernet switch
Figure 20: Connecting the Drive to a PC
2.
Connect the cable coming from the PC or from the Ethernet switch to the Ethernet port X0 on the control unit of the drive.
3. See the Application Guide for information on the next steps.
MyDrive® Insight
4.7.4
Installing MyDrive® Insight
4.7.4.1
1.
To install the tool, go to https://suite.mydrive.danfoss.com/content/tools.
2. Install MyDrive® Insight.
For more information on how to use the tool, see the online help in MyDrive® Insight.
3.
Use MyDrive® Insight to connect the drive to a PC.

Backing up and Restoring Parameters

4.7.4.2
The parameter backup and restore functionality in MyDrive® Insight can be used to back up and restore all or part of the drive
parameters.
1. Log into MyDrive® Insight® as admin.
2. Go to Device > Setup & Service > Parameters > Live.
3.
Click Create backup/Restore on the menu bar.
What to do next: For more information, see the MyDrive® Insight documentation.
4.7.4.3

Performing a Factory Reset

The factory reset can be performed separately for each parameter group, or for all settings.
1. In MyDrive® Insight, go to Device > Setup & Service > Restore > Select Restore Content.
– To reset all settings, select All Settings.
–
To reset only the functional safety settings, select Functional Safety Configuration Variables.
46 | Danfoss A/S © 2024.08
Functional Safety for Frequency Converters, Upgradable (+BEF2)
1
AQ319741840653en-000401 / 136R0268