Vacm View - Asus GIGAX2048 User Manual

4.6.5

VACM View

VACM (View-based Access Control Model) View is used to view the
information of SNMPV3 VACM Group.
View Name: enter the security group name.
View Type: Select the View Type that the view belongs. Included or
Excluded when View Subtree matches the Oid in the SNMPv3
message.
View Subtree: enter the View Subtree that the View belongs. The
Subtree is the Oid to match the Oid in the SNMPv3 message. The
match is good when the subtree is shorter than the Oid in the
SNMPv3 message.
View Mask: enter the View Mask that the View belongs. Each bit in
the mask represents the digit between the dots of View Subtree
from left side. Bit '0' means 'don't care'.
Click on the
above information. Then you will see the new added entry shows in the
view window. You can remove the existed views by selecting the entry with
the mouse, then clicking on
existed VACM View entries. Click
to refresh the settings to current value. To make the
configuration effective, please go to "Save Configuration" page, then click
on .
GigaX Series L2 Managed Switch User Guide
when you create a new VACM View entry by the
. The button updates the
to save effective. Click