Asus GIGAX2048 User Manual page 119

<discard: 0-3>
[Remove]
Static ARL entries can be deleted by indicating the MAC address and its
VLAN ID. These two-field combination is formed as unique entry in ARL
table.
CLI command: l2 arl delete <mac address> <vlan id>
[Retrieve]
Restores the previous saved settings from configuration file.
CLI command: l2 arl retrieve
[Show VLAN]
Displays the existing VLAN information of the switch.
CLI command: l2 vlan show <vlan id>
[Name]
[VLAN ID]
Allows user to config the VLAN settings. User may create a new VLAN
by giving a unique VLAN ID, a VLAN description name, and its port
member list, note that the port member here is indicated as tagged port
member. To specify a VLAN port member as untagged port, CLI
command utportadd can achieve this purpose. User may use CLI
command add or remove to further add some port members to a VLAN
or exclude some existing port members from a VLAN.
CLI command: l2 vlan create <vlan id> <vlan name> <port list>
CLI command: l2 vlan add <vlan id> <port list>
CLI command: l2 vlan remove <vlan id> <port list>
CLI command: l2 vlan utportadd <vlan id> <untagged port list>
[DHCP Snoop]
Enable or disable DHCP snooping on this VLAN.
CLI command: l2 dhcpsnoop enable <vlan id list>
GigaX Series L2 Managed Switch User Guide