4.6.5
VACM View
VACM (View-based Access Control Model) View is used to view the
information of SNMPV3 VACM
View Name: enter the security group name.
View Type: select the View Type that the View belongs. Included or
Excluded when View Subtree matches the Oid in the SNMPv3 message.
View Subtree: enter the View Subtree that the View belongs. The Subtree
is the Oid to match the Oid in the SNMPv3 message. The match is good
when the subtree is shorter than the Oid in the SNMPv3 message.
View Mask: enter the View Mask that the View belongs. Each bit in the
mask represents the digit between the dots of View Subtree from left side.
Bit '0' means 'don't care'.
GigaX Series L2 Managed Switch User Guide
Figure 32. VACM Group
Group.
59