GigaX Series L2 Managed Switch User's Guide
4.9.4
Policy Attach
A policy does nothing if you don't attach it to any ingress port. You can
use this page to attach a policy to ingress ports. A port only can attach
one policy.
Click on
refresh the settings to current value. To make the configuration effective,
please go to "Save Configuration" page, then click on
There are a few ways to attach a policy to ports:
• Attach to all ports: the policy will apply to all the ports of the system.
• Attach to certain ports: you can specify the ingress ports to be
applied.
• Detach all: remove the policy from the attached ports.
94
to save the configuration. Click on
to
.