Asus GIGAX2048 User Manual page 110

GigaX Series L2 Managed Switch User's Guide
CLI command: net interface vlan sw0 <VLAN ID>
[DHCP Client]
Enable DHCP to get a dynamic IP address, or disable DHCP to specify
a static IP address. If you enable DHCP, you can renew or release the
IP address for the switch, and use show command to display the
dynamic IP address.
CLI command: net interface dhcp sw0 <enable/ disable/
renew/ release/ show>
[IP Address]
Displays the static IP address for the switch. This IP address is used for
manageable purpose, i.e. network applications such as, http server, SNMP
server, ftp server , telnet server and SSH server of the switch are all using
this IP address.
CLI command: net interface ip sw0 < IP address> <netmask>
[Network Mask]
Displays the subnet mask for the switch.
CLI command: l3 interface ip sw0 < IP address> <netmask>
[Default Gateway]
Displays the IP address of the default gateway. This field is necessary if the
switch network contains one or more routers.
CLI command: net route static add <destination subnet/IP>
<gateway> <netmask> <metric>
[Password Protection is] [Enabled/Disabled]
When the password protection is enabled, the web interface will request a
user name and password authentication while user accesses the switch
through the browser.
110