Table of Contents
Advertisement
4.8.3
RADIUS
In order to use external RADIUS server, the following parameters are
required to be setup:
• Authentication Server IP: The IP address of the RADIUS server.
• Authentication Server Port: The port number for the RADIUS server
is listening to.
• Authentication Server Key: The key is used for communications
between GigaX and the RADIUS server.
• Confirm Authentication Key: Re-type the key entered above.
The VLAN of the RADIUS server connected to the switch must be
the same as the VLAN of the system management interface.
Click
refresh the settings to current value.
GigaX Series L2 Managed Switch User Guide
to make the settings permanent. Click
to
Advertisement
Table of Contents
Troubleshooting
