CLI command: filter rule dstip <set id> <rule id> <type: (any/[ip]
[subnet])>
CLI command: filter rule srcip <set id> <rule id> <type: (any/[ip]
[subnet])>
CLI command: filter rule dstport <set id> <rule id> <type: (any/[port])>
CLI command: filter rule srcport <set id> <rule id> <type: (any/[port])>
[Rule Mode] [MAC Rule]
[Action] [Permit/Deny]
[Source MAC]
[Destination MAC]
[Delete]
Allows user to delete the MAC filter rule.
CLI command: filter rule delete <set id> <rule id>
[Rule Mode] [IP Rule]
[Action] [Permit/Deny]
[Source IP] [Type/IP, Mask]
[Destination IP] [Type/IP, Mask]
[Source Port] [Type/Port]
[Destination Port] [Type/Port]
[Protocol] [ICMP/TCP/UDP/ANY]
[Delete]
Allows user to delete the MAC filter rule.
CLI command: filter rule delete <set id> <rule id>
GigaX Series L2 Managed Switch User Guide