Figure 43. Usm User - Asus GIGAX2048 User Manual

Priv Protocol: enter the Priv Protocol that Engine ID and Name
belong. Only NoPriv, DES can be chosen. If the NoPriv is chosen,
there is no need to enter password.
Priv Password: enter the password that the Priv Protocol belongs.
The password needs at least 8 characters or digits.
Click on the
above information. Then you will see the new added entry shows in the
User window. You can remove the existed User by selecting the entry with
the mouse, then clicking on
existed USM User entries. Click
to refresh the settings to current value. To make the
configuration effective, please go to "Save Configuration" page, then click
on .
GigaX Series L2 Managed Switch User Guide
when you create a new USM User entry by the

Figure 43. USM User

. The button updates the
to save effective. Click