Table of Contents
Advertisement
7.2
Replacing defective fans
When any one of the switch fans (located on the rear panel) becomes
defective, you can easily replace it following these steps.
1. Unlock the fan module by loosening the thumbscrew that secures it to
the rear panel.
2. Carefully pull the module out as shown.
GigaX Series L2 Managed Switch User Guide
Turn off the power of the switch when you remove the fan
module on the rear side of the switch.
Figure 72. Loosening the thumbscrew
Figure 73. Removing the fan module
Advertisement
Table of Contents
Troubleshooting
