Asus GIGAX2048 User Manual page 140

GigaX Series L2 Managed Switch User's Guide
[CoSOverride] [Disable/Enable]
Allows users to enable or disable CoS override of some particular ports. CoS
override only can be enabled when trust state is 'No' trust.
CLI command: qos trust override <enable/disable> <port list/*>
[CoS to DSCP]
Allows users to set up the CoS to DSCP map.
CLI command: qos map cosdscp <dscp1> <dscp2> <dscp3> <dscp4>
<dscp5> <dscp6> <dscp7> <dscp8>
[DSP to CoS]
Allows users to set up the DSCP to CoS map.
CLI command: qos map dscpcos <dscp list> to <cos priority>
[Class Name]
[Match][None/Filter/DSCP]
[Filter Set ID]
[DSCP][0/8/10/16/18/24/26/32/34/40/46/48/56]
[Add]
Creates a new class by specifying a unique class name and match mode. If
the match mode is 'Filter', users must input an existed filter set ID. If the match
mode is 'DSCP', users must input DSCP values. If users input <dscp list>, <acl
id> will not display, and <acl id> force to 0.
CLI command: qos class new <class name>
CLI command: qos class match <class id(1-56)>
dscp (0/8/10/16/18/24/26/32/34/40/46/48/56):<dscp value>acl id:<acl id>
[Modify]
Allows users to modify a match criterion of a class. If users input <new dscp
list>, <new acl id> will not display, and <new acl id> force to 0.
CLI command: qos class modify <class id(1-56)>
dscp (old DSCP): <new dscp list>
acl id (old ACL ID):<new Acl ID>
140