Configuration Program - TRENDnet TW100-BRF114 User Manual

Configuration Program

The TW100-BRF114 contains an HTTP server. This enables you to connect to it, and confi-
gure it, using your Web Browser. Your Browser must support JavaScript. The
configuration program has been tested on the following browsers:
•
Netscape V4.08 or later
•
Internet Explorer V4 or later
Preparation
Before attempting to configure the TW100-BRF114, please ensure that:
•
Your PC can establish a physical connection to the TW100-BRF114. The PC and the
TW100-BRF114 must be directly connected (using the Hub ports on the TW100-BRF114)
or on the same LAN segment.
•
The TW100-BRF114 must be installed and powered ON.
•
If the TW100-BRF114 's default IP Address (192.168.0.1) is already used by another
device, the other device must be turned OFF until the TW100-BRF114 is allocated a new
IP Address during configuration.
Using UPnP
If your Windows system supports UPnP, an icon for the TW100-BRF114 will appear in the
system tray, notifying you that a new network device has been found, and offering to create a
new desktop shortcut to the newly-discovered device.
•
Unless you intend to change the IP Address of the TW100-BRF114, you can accept the
desktop shortcut.
•
Whether you accept the desktop shortcut or not, you can always find UPnP devices in My
Network Places (previously called Network Neighborhood).
•
Double - click the icon for the TW100-BRF114 (either on the Desktop, or in My Network
Places) to start the configuration. Refer to the following section Setup Wizard for details
of the initial configuration process.
Setup
9