Low Battery – If the 9V battery lowers to about 7V, the iServer will prompt an alarm.
Relay 1 Activated – If relay 1 is activated the iServer will prompt an alarm.
See Alarm Relays section under the Configuration page (Section 4.4.3.4).
Relay 2 Activated – If relay 2 is activated the iServer will prompt an alarm.
See Alarm Relays section under the Configuration page (Section 4.4.3.4).
4.4.5 Security
This page provides security and access settings for the iServer. Fields are described
below.
Security
Address
http://192.168.1.200
Readings
Overview
Network
Configuration
Management
Security
Recording
System
Diagnostics
Log Out
Web Link
Login Password
Admin Password
Local Port Password
Telnet Console Access
Web Server Access
Secured Readings and Charts
IP Exclusivity
Figure 4.21 Security Menu
Setup
12345678
00000000
Enable
No IP Address
1
0.0.0.0
2
0.0.0.0
3
0.0.0.0
4
0.0.0.0
Save Changes
32
Change
Change
Change
Reset
Need help?
Do you have a question about the iServer MicroServer iTHX-SD and is the answer not in the manual?