Figure 4.7 Pinging The Iserver From Ms-Dos Prompt - Omega iServer MicroServer iTHX-SD User Manual

4.1.3 Direct Connection (Method 3) (continued)
To verify a good connection to the iServer, from a DOS prompt on your computer
type "ping 192.168.1.200" and press Enter.
You should get a reply as shown in Figure 4.7.
If you don't receive a reply it means that you do not have a network connection
between your PC and the iServer.
Check your IP address, subnet mask, and gateway address.
C:\>ping 192.168.1.200
Pinging 192.168.1.200 with 32 bytes of data:
Reply from 192.168.1.200: bytes=32 time=15ms TTL=64
Reply from 192.168.1.200: bytes=32 time=8ms TTL=64
Reply from 192.168.1.200: bytes=32 time=8ms TTL=64
Reply from 192.168.1.200: bytes=32 time=8ms TTL=64
Pinging statistics for 192.168.1.200:
Packets: Sent=4, Received=4, Lost=0 (0% loss)
Approximate round trip times in milli-seconds:
Minimum=8ms, Maximum=15ms, Average=9ms

Figure 4.7 Pinging the iServer from MS-DOS Prompt

16