Advertisement
Hawk 100
Option for the Fuel System
BVM decided to use a length of Brass tubing
between our Cap and Clunk. This was the only mod
we made to the system
UAT
Secure your tubing to your UAT with Safety Wire or
your favorite method. There are 2 connections that
will be secured. The 2 top fittings will be the only 2.
The middle connection uses a Screw type
connection.
Note: The Demo Hawk uses the UAT provided.
You Must Hold This Tank Vertical during the
initial run up to purge the air from the Bag.
Failure to do this will leave air trapped in the bag.
Check out the link below to see our first run up of the
Hawk. https://youtu.be/28Nm8QCeryw
BVM ©2023
8
4/2023
Advertisement
Need help?
Do you have a question about the Tomahawk Hawk 100 and is the answer not in the manual?
Questions and answers