Mounting The Vent; Fuel Valve Fitting - BVM Tomahawk Hawk 100 Construction And Operation Manual

Hawk 100

Mounting the Vent

The BVM Hawk has the vent mounted on the fuse
just behind the equipment tray. Your Hawk will
come with wood spacer that will get glued into the
fuse. After gluing in place drill a hole through the
fuse and install the Overflow fitting.
Once the hole is made you can finish mounting the
Overflow fitting and connect the tubing. There is a
small nut that holds the overflow fitting in place. A
small drop of Z-42 will help keep this secure.

Fuel Valve Fitting

The Hawk comes with a quick fuel filling valve
system. You can mount this anyplace that is
convenient. BVM mounted theirs in the Engine bay in
the corner of the hatch.
BVM ©2023 9 4/2023