Accessing The Web Interface - Haivision Makito X Encoder Quick Start Manual

Power Adapter 12VDC with HiRose 3-pin Connector

Accessing the Web Interface

1. Open a Web browser of your choice, such as Chrome, Firefox, Safari, or Internet Explorer.
2. Type the IP address for the encoder into the URL address bar and press Enter.
The Makito X comes pre-configured with the following default settings:
IP Address
10.5.1.2

Note
The above network settings may be different if your Makito X was pre-configured to
interoperate with a Furnace system.
Before you can begin streaming, you must configure the Makito X with a valid IP address and
gateway to work in your environment. For details, see
Guide.
Makito X Encoder 2.2
Makito X Encoder Quick Start Guide
Subnet Mask
255.255.0.0
Configuring Network Settings
5
www.haivision.com
Gateway
10.5.0.1
in the User's
Generated on: 2024-02-09 18:44:33
HVS-ID-QSG-MAXK-22, Issue 01