Advertisement
Quick Links
Makito X Encoder Quick Start Guide
This Quick Start Guide summarizes the basic steps required to install and configure the Makito X
encoder (single-height or dual-height chassis) to stream to your compatible decoding device or player,
such as the Makito X or the Makito decoder.
For detailed configuration and operation information, please refer to the User's Guide (available at
https://doc.haivision.com
with the appliance or available on the Haivision Support Portal at http://support.haivision.com) .For
information on the MB6 (6-slot) or MB21 (21-slot) chassis, please refer to the
Installation Guide
.
Installing the Encoder
1.
Unpack the box and visually inspect the package contents for any evidence of shipping
damage. [See the Important Notice postcard in the box for list of contents.]
2.
Install the Makito X as a desktop unit on a flat, well-ventilated surface.
Important
Refer to
the Safety Guidelines
MXE
in the
User's
Makito X Encoder 2.2
Makito X Encoder Quick Start Guide
Makito X Encoder 2.2
) . For the default credentials, refer to the Important Notice (postcard shipped
and
Waste Electrical and Electronic Equipment (WEEE) Disposal
Guide.
1
www.haivision.com
MB6 and MB21 Chassis
Generated on: 2024-02-09 18:44:33
HVS-ID-QSG-MAXK-22, Issue 01
Advertisement
Related Manuals for Haivision Makito X Encoder
Summary of Contents for Haivision Makito X Encoder
- Page 1 ) . For the default credentials, refer to the Important Notice (postcard shipped https://doc.haivision.com with the appliance or available on the Haivision Support Portal at http://support.haivision.com) .For information on the MB6 (6-slot) or MB21 (21-slot) chassis, please refer to the MB6 and MB21 Chassis...
- Page 2 SDI Video Input • Composite (CVBS) Video Input: Use the BNC connector(s). • SDI Video/Embedded Audio (SD or HD) Input: Use the BNC connector(s). SDI Video Input DVI Video Input Makito X Encoder 2.2 Generated on: 2024-02-09 18:44:33 Makito X Encoder Quick Start Guide HVS-ID-QSG-MAXK-22, Issue 01...
- Page 3 (unbalanced shown below). Note A balanced audio cable adapter is available from Haivision upon request. Please contact your sales representative or email Haivision at: sales@haivision.com The Makito X also supports Serial Digital Interface (SDI) embedded audio format. Selection between Analog (the default) and SDI digital audio is done from the Web interface (see Configuring Audio...
- Page 4 Rear View (#S/B-292E-HDSDI2) showing Conxall 3-pin Locking Connector Power Adapter 12VDC with Conxall 3-pin Connector Single-Height Chassis Dual-Height Chassis Dual-Height Chassis Rear View (Makito X HEVC Encoder #S-292E-SDI2-HEVC) Makito X Encoder 2.2 Generated on: 2024-02-09 18:44:33 Makito X Encoder Quick Start Guide HVS-ID-QSG-MAXK-22, Issue 01...
-
Page 5: Accessing The Web Interface
Before you can begin streaming, you must configure the Makito X with a valid IP address and gateway to work in your environment. For details, see Configuring Network Settings in the User's Guide. Makito X Encoder 2.2 Generated on: 2024-02-09 18:44:33 Makito X Encoder Quick Start Guide HVS-ID-QSG-MAXK-22, Issue 01... - Page 6 4. Sign in to the Makito X Web interface, using the default administrative username and password. Please refer to the Important Notice document (included in the box or available from the Download Center on the Haivision Support Portal) for the default login credentials. For security purposes, be sure to change the default passwords! See...
-
Page 7: Configuring The Video Settings
To apply your changes, click Apply. • To start or stop the encoder, click Start or Stop (as applicable). • To view statistics for the encoder, click Statistics. Makito X Encoder 2.2 Generated on: 2024-02-09 18:44:33 Makito X Encoder Quick Start Guide HVS-ID-QSG-MAXK-22, Issue 01... -
Page 8: Configuring The Audio Settings
To start or stop the encoder, click Start or Stop (as applicable). • To mute the audio (when active), click Mute. • To view statistics for the encoder, click Statistics. Makito X Encoder 2.2 Generated on: 2024-02-09 18:44:33 Makito X Encoder Quick Start Guide HVS-ID-QSG-MAXK-22, Issue 01... -
Page 9: Setting Up Streaming
Under Destination, type in the IP Address and Port number, for example, multicast address and port . 225.6.7.8 2000 Leave the default values for the remaining Streaming parameters. See Streaming Output Settings the User's Guide. Makito X Encoder 2.2 Generated on: 2024-02-09 18:44:33 Makito X Encoder Quick Start Guide HVS-ID-QSG-MAXK-22, Issue 01... -
Page 10: Setting Up Recording
2000 2400 (as defined in Step #6 in Setting Up Streaming). For the recommended settings to optimize the Makito X encoder configuration to stream to the Makito X decoder, see Makito Decoder Interoperability in the User's Guide. Note In order to optimize your encoder’s performance, it is recommended that only the required network services be enabled. - Page 11 Obtaining Documentation This document was generated from the Haivision InfoCenter. To ensure you are reading the most up-to- date version of this content, access the documentation online at https://doc.haivision.com. You may generate a PDF at any time of the current content. See the footer of the page for the date it was generated.
Need help?
Do you have a question about the Makito X Encoder and is the answer not in the manual?
Questions and answers