Haivision Makito XCR Installation Manual

Makito XCR Encoder Installation Guide
This Installation Guide provides the steps required to install and configure the Makito XCR Video
Encoder (#S-292E-XCR) to stream to your compatible decoding device. Please refer to
Encoder User's Guide for detailed configuration and operation information.
We recommend that you familiarize yourself with this Installation Guide before installing your encoder.
Use the following guidelines when unsafe conditions exist or when potentially hazardous voltages are
present:
• Always use caution and common sense.
• To reduce the risk of electrical shock, do not operate equipment with the cover removed.
• Repairs must be performed by qualified service personnel only.
Improper handling and/or installation practices of sensitive equipment may VOID the warranty.
 Caution
When handling components, or when setting switch options, always use an antistatic wrist strap
connected to a grounded equipment frame or chassis. If a wrist strap is not available, periodically
touch an unpainted metal surface on the equipment. Never use a conductive tool, such as a
screwdriver or a paper clip, to set switches.
Waste Electrical and Electronic Equipment (WEEE)
Disposal
In accordance with the European Union (EU) WEEE Directive, Haivision products that fall within
the scope of the WEEE, are labeled with the above symbol, and customers are encouraged to
responsibly recycle their equipment at the time of disposal. Haivision also offers its customers
the option of returning Haivision equipment to facilitate its environmentally sound disposal.
For more information, please visit our website at: https://www.haivision.com/environment.
Makito X Encoder 2.2
Makito XCR Encoder Installation Guide
Makito XCR Encoder 2.2
1
www.haivision.com
the Makito X
Generated on: 2024-02-09 18:54:55
HVS-ID-IG-MAKXCR-22, Issue 02