Zone Setup - Denon AVR-4311CI Owner's Manual

Setting items
R hapsody Account Username / Password / Clear
Set or change Username • For character input, see page 78.
and Password (vpage 46
"Listening to Rhapsody").
N apster Account Username / Password / Clear
Set or change Username • For character input, see page 78.
and Password (vpage 42
"Listening to Napster").
Friendly Name / DHCP / IP Address / MAC Address
N etwork Info.
Display network information.

Zone Setup

Set the audio to play back with multi-zone (ZONE2, ZONE3).
Setting items
B ass –10dB – +10dB (0dB)
Adjust low frequency range
(bass).
T reble –10dB – +10dB (0dB)
Adjust high frequency range
(treble).
H PF ON : The low range is attenuated.
Make settings for cutting OFF : The low range is not attenuated.
the low range to reduce
distortion in the bass.
L ch Level –12dB – +12dB (0dB)
Adjust the left channel
The "Lch Level" can be set when "Channel" (vpage 103) is set to
output level.
"Stereo".
R ch Level –12dB – +12dB (0dB)
Adjust the right channel
The "Rch Level" can be set when "Channel" (vpage 103) is set to
output level.
"Stereo".
C hannel Stereo : Select stereo output.
Set the signal output from Mono : Select mono output.
multi-zone.
When "Amp Assign" – "Assign Mode" (vpage 95) is set to "Z2/3-
MONO", the "Channel" setting is automatically set to "Mono".
Remote control operation
buttons
Setting details
Default settings are underlined.
Setting details
Move the cursor
(Up/Down/Left/Right)
Setting items
V olume Level Variable : Volume adjustment is enabled by main unit and remote control
Set the volume output level. unit.
–40dB (41) : Fix volume at –40 dB. Set when adjusting volume by external
amplifi er.
0dB (81) : Fix volume at 0 dB. Set when adjusting volume by external
amplifi er.
When "Amp Assign" – "Assign Mode" (vpage 95) is set to
"ZONE2", "ZONE2/3" or "Z2/3-MONO", the "Volume Level" setting
is automatically set to "Variable".
V olume Limit OFF : Do not set a maximum volume.
Make a setting for –20dB (61) / –10dB (71) / 0dB (81)
maximum volume.
• This can be set when the multi-zone "Volume Level" setting (vpage 103)
is "Variable".
• This is displayed from 0 to 99 when "Volume Display" (vpage 104) is set
to "Absolute".
P ower On Level Last : Use the memorized setting from the last session.
Defi ne the volume setting – – –dB (0) : Always mute when power is turned on.
that is active when the –80dB – 18dB (1 – 99) : The volume is adjusted to the set level.
power is turned on.
• This can be set when the multi-zone "Volume Level" setting (vpage 103)
is "Variable".
• This is displayed from 0 to 99 when "Volume Display" (vpage 104) is set
to "Absolute".
M ute Level Full : The sound is muted entirely.
Set the amount of –40dB : The sound is attenuated by 40 dB down.
attenuation when muting –20dB : The sound is attenuated by 20 dB down.
is on.
Confi rm the setting
MANUAL SETUP
Setting details
103
Return to previous menu