Speaker Installation/Connection (Advanced Connection); Install - Denon AVR-4311CI Owner's Manual

Speaker installation/connection (Advanced connection)

This unit is equipped with a 9-channel built-in power
amplifi er and 11.2-channel PRE OUT connector that
enable it to handle various speaker systems.
This section provides the installation, connection,
and setup methods of speaker systems other
than the 7.1-channel system (with surround back
speakers).
For the speaker installation, connection, and setup
methods of the 7.1-channel system with surround
back speakers, see "Simple version (Simple setup
guide)" (vpage 4).
Use Audyssey ® Auto Setup function of this unit
to automatically detect the number of connected
speakers and perform optimal settings for the
speakers to be used.
Procedure for speaker settings

Install

Connect (vpage 56)
Set up speakers (vpage 63)
54
Install
This unit is compatible with Audyssey DSX™ (vpage 132) and
Dolby Pro Logic gz (vpage 133), which offers an even wider and
deeper surround sensation.
When using Audyssey DSX, install front wide speakers or front
height speakers.
When using Dolby Pro Logic gz, install front height speakers.
Install the surround back speakers in a position 2 to 3 ft (60 to 90 cm)
higher than ear level.
Surround
Front height
speaker
speaker
• Point slightly
downwards
Front wide
At least
speaker
z1
2 – 3 ft /
3.3 ft / 1 m
60 – 90 cm
z2
45˚
Front
speaker
GViewed from the sideH
z1 Recommended for Dolby Pro Logic gz
z2 Recommended for Audussey DSX
When 7.2ch / 9.2ch / 11.2ch (Surround back / Front
height / Front wide speaker) installed
FHL
FWL
SL
Surround back
speaker
• Point slightly
downwards
z1 22˚ – 30˚
z4 90˚ – 110˚
FHR
SW SW
FL FR
1 2
C
FWR
SR
Listening
position
SBL SBR
z2 22˚ – 45˚ z3 55˚ – 60˚
z5 135˚ – 150˚