Denon AVR-4311CI Owner's Manual page 94

n Manual EQ
Use the graphic equalizer to adjust the tone of each speaker.
"Manual EQ" can be set when "MultEQ XT 32" setting (vpage 89) is "Manual".
Setting items
Adjust CH q Select the speaker tone adjustment method.
Correct the tone of each L/R : Adjust the tone of left and right speakers together.
speaker.
Each : Adjust the tone of each speaker.
All : Adjust the tone of all speakers together.
w Select the speaker.
e Select the adjustment frequency band.
63Hz / 125Hz / 250Hz / 500Hz / 1kHz / 2kHz / 4kHz / 8kHz / 16kHz
• Select the speakers you want to adjust when "L/R" or "Each" is
selected.
r Adjust the level.
–20.0dB – +6.0dB (0.0dB)
Curve Copy Yes : Copy.
Copy "Audyssey Flat" curve No : Do not copy.
from MultEQ ® XT 32.
"Curve Copy" is displayed after Audyssey ® Auto Setup has been
performed.
Default Yes : Reset to the defaults.
The "Manual EQ" settings No : Do not reset to the defaults.
are returned to the default
settings.
Remote control operation
buttons
Default settings are underlined.
Setting details
Move the cursor
(Up/Down/Left/Right)
n Dolby Volume
Setting items
ON : Enables the Dolby Volume function.
Dolby Volume
Automatically adjusts OFF : Disables the Dolby Volume function.
the volume that varies
depending on the contents
• Store "Dolby Volume" for each source.
and input source and
• When "Dolby Volume" is set to "ON", you cannot set "Tone",
performs appropriate
"D.COMP", "DRC" (vpage 86, 88).
corrections of the frequency
• When "Dolby Volume" is set to "ON", "MultEQ XT 32" (vpage 89) is
characteristic.
automatically set to "OFF".
NOTE
• If the playback level of a source you are listening to is high, the data
compression volume will become higher when the Dolby Volume
function is enabled.
When you set "Dolby Volume" to "ON" from "OFF", the original
playback level is restored. It is recommended that you lower the volume
once before changing the setting.
• The Dolby Volume function cannot be used in the DIRECT or PURE
DIRECT mode.
Volume Leveler Low : Set the adjustment volume to the lowest level. Adjusts the volume
Adjusts the volume so that of contents with extremely high and low volume to a constant volume.
the playback level between Mid : Set the adjustment volume to the medium level. Adjusts the volume
different contents will be of contents with higher and lower volume than the average volume to a
always constant. constant volume.
High : Set the adjustment volume to the highest level. Adjusts the volume
of all contents to a constant volume.
Volume Modeler Half : Corrects the frequency to a flat level to make listening easier for
Perform volume correction playback with low volume.
for each frequency band. Full : Corrects the frequency to a flat level to make listening easier at all
times.
OFF : Disables the Volume Modeler function.
"Dolby Volume" settings are stored for each input source.
Confirm the setting
AUDIO/VIDEO ADJUST
Default settings are underlined.
Setting details
91
Return to previous menu