Denon AVR-4311CI Owner's Manual page 70

Quick select function
All of the settings in step 1 can be memorized together. By memorizing
frequently used settings, you can quickly access and enjoy a playback
environment that is consistently the same.
n Saving the settings
1
Set the items below to the settings you want to save.
q Input source (vpage 28)
w Volume (vpage 28)
e Surround Mode (vpage 50)
r Video Select (vpage 83)
t Audyssey Setting
(MultEQ ® XT 32, Dynamic EQ ® ,
Dynamic Volume ® ) (vpage 89)
2
QUICK SELECT
Press and hold the desired
"Memory" appears on the display.
The current settings will be memorized.
GQuick select defaultsH
Input source
QUICK SELECT 1 BD
QUICK SELECT 2 SAT/CBL
QUICK SELECT 3 DOCK
n Recalling the settings
QUICK SELECT
Press at which the
settings you want to call out are saved.
The , or indicator illuminates on
the display.
Naming quick select settings
See "Quick Select Name" (vpage 105).
• The Quick Select function can be set separately for the different
zones (vpage 74 "Quick select function").
QUICK SELECT
• If on the main unit
is pressed, the same function as
with the remote control unit can be
obtained.
NOTE
Input sources stored with the quick select function cannot be selected
if they have been deleted at "Source Delete" (vpage 104). In this case,
store them again.
REC OUT mode
until
When using the audio/video recording connectors (DVR outputs), you
can record the audio or video from a different program source while
listening to the currently played track.
1
Press ZONE2/3 / REC SELECT
Volume
"ZONE2 SOURCE" is shown on the
display.
–40 dB
–40 dB
2
SOURCE SELECT
Turn
–40 dB
"RECOUT SOURCE" is
displayed.
The indicator illuminates.
ZONE2 SOURCE ZONE2 PHONO
RECOUT HD Radio RECOUT SIRIUS
3
Turn SOURCE SELECT
be recorded.
• For operating instructions, refer to the respective equipment's
operating instructions.
4
Start recording.
• For operating instructions, refer to the respective equipment's
operating instructions.
• To cancel, press
until "ZONE2 SOURCE" is displayed.
• Make a test recording before starting the actual recording.
• Signals are only output to the analog REC OUT connectors when
the digital signals input to the digital input connectors (OPTICAL/
COAXIAL) are PCM (2-channel) signals.
• As the digital audio signal input from the HDMI or DENON LINK
connector is not output to the digital recording connector (OPTICAL),
you should connect using the OPTICAL and COAXIAL connectors.
• Sources selected with the REC OUT mode are output from ZONE2
as well.
• The operable buttons on the remote control unit in REC OUT mode
while it is in the operating mode for ZONE2 are as follows:
• ZONE/DEVICE power button
• Muting button
• Master volume control button
• The "HD Radio" digital audio output signals are not output from the
OPTICAL2 output connectors. Also, network audio signals (Internet
radio, media server, USB, Napster, Rhapsody and Pandora) are
output as copy-protected signals.
.
NOTE
• Recordings you make are for your personal enjoyment and should
not be used for other purposes without permission of the copyright
until
holder.
• Input sources for which "Delete" is selected at "Source Delete"
(vpage 104) cannot be selected.
···· ZONE2 HD Radio
···· RECOUT SOURCE
to choose the input source to
Convenient functions
ZONE2/3 / REC SELECT SOURCE SELECT
, then turn
67