Introduction; Getting Started; Safety Instructions - Kramer VIA Connect2 User Manual

Introduction

Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world
of unique, creative, and affordable solutions to the vast range of problems that confront the
video, audio, presentation, and broadcasting professional on a daily basis. In recent years, we
have redesigned and upgraded most of our line, making the best even better!

Getting Started

We recommend that you:
Unpack the equipment carefully and save the original box and packaging materials for
•
possible future shipment.
• Review the contents of this user manual.
Go to https://www1.kramerav.com/gc/product/VIAConnect2
manuals, application programs, and to check if firmware upgrades are available (where
appropriate).
Achieving Best Performance
Use only good quality connection cables (we recommend Kramer high-performance,
•
high-resolution cables) to avoid interference, deterioration in signal quality due to poor
matching, and elevated noise levels (often associated with low quality cables).
Do not secure the cables in tight bundles or roll the slack into tight coils.
•
Avoid interference from neighboring electrical appliances that may adversely influence
•
signal quality.
Position your Kramer
•

Safety Instructions

Caution:
• This equipment is to be used only inside a building. It may only be connected to other
equipment that is installed inside a building.
• For products with relay terminals and GPI\O ports, please refer to the permitted rating
for an external connection, located next to the terminal or in the User Manual.
• There are no operator serviceable parts inside the unit.
Warning:
• Use only the power cord that is supplied with the unit.
• Disconnect the power and unplug the unit from the wall before installing.
• Do not open the unit. High voltages can cause electrical shock! Servicing by qualified
personnel only.
• To ensure continuous risk protection, replace fuses only according to the rating
specified on the product label which is located on the bottom of the unit.
VIA Connect² – Introduction
VIA Connect² away from moisture, excessive sunlight and dust.
Kramer Electronics Ltd.
to check for up-to-date user
2