Using The Whiteboard - Kramer VIA Connect2 User Manual

4. Move your cursor up past the top of your device screen and it will appear at the bottom
of the main display with your nickname next to it.
5. Users in Collaboration mode can control the device shared on the Main Display.
6. Use your cursor as a pointer or operate any of the features from the Main Display and
use your keyboard to type text on the Main Display, when necessary.
To use your cursor to control your own device, move your cursor past the bottom
of the main display until it reappears at the top of your device screen.

Using the Whiteboard

The Whiteboard enables VIA Connect² participants
white board. Drawings are temporary but can be saved when collaboration ends.
You can make notes which are not visible to anyone else or draw with other participants.
To start the Whiteboard:
1. On the Client
2. The whiteboard session starts on the main display and the initiator is put into
Collaboration mode.
VIA Connect² – For User: Connecting via VIA Connect²
Figure 133: Collaboration Cursors on the Main Display
App, click Whiteboard (someone else can be sharing their screen).
Figure 134: Whiteboard page
Kramer Electronics Ltd.
to draw on the main display or on a
113