For Installer: Connecting Via Connect²; Connecting Device - Kramer VIA Connect2 User Manual

For Installer: Connecting VIA
Connect²
Always switch off the power to each device before connecting it to your
connecting your
device.

Connecting Device

If you wish to use a Kramer active optical pluggable HDMI cable with your
contact your local Kramer office to assist in purchasing the correct cable.
To connect VIA Connect² as illustrated in
1. Connect the keyboard and mouse.
2. Connect an HDMI display.
3. Connect to the LAN (default mode).
4. If required, connect a wired HDMI video source.
To enable participation in a presentation session (send and receive content), connect
VIA Connect²
network (LAN or WLAN).
VIA Connect² – For Installer: Connecting VIA Connect²
VIA Connect², connect its power and then switch on the power to each
Figure 5: Connecting
and all participant devices (PCs/ MACs/ smartphones/tablets) to the same
VIA Connect²
Figure 5:
Kramer Electronics Ltd.
VIA Connect². After
VIA Connect²,
11