User Management - Kramer VIA Connect2 User Manual

User Management

This section describes how to add user accounts to the database of your
device. A user account is required for the Gateway Dashboard Page and if your
Connect² is in Database mode (see
to join a VIA meeting.
To add a user account to your VIA Connect² database:
1. Click User Management on the Gateway Dashboard Page navigation pane.
The User List page appears.
2. Click Add User.
The Add User window appears.
3. Type the new Username, Password and Confirm Password.
4. Under User Role, select from the following administrative levels:
Web Administrator – Access to change all system settings, including Digital

Signage.
Digital Signage – Able to configure the Digital Signage only(see

on page 66). This is only visible when Moderator mode is enabled.
5. Select one of the following participation levels:
VIA Connect² – For Web Administrator: Gateway Management Pages
Moderator Mode
Figure 10: User Management Page
Figure 11: Add User Window
VIA Connect²
on page 52), a user account is required
Digital Signage
Kramer Electronics Ltd.
VIA
17