User Management; Managing Network Settings - Kramer VIA Connect PRO User Manual

User Management

This section describes how to add user accounts to the database of your
device. A user account is required to access the Gateway Management Pages (see
in to Gateway Management Pages
mode (see Moderator Mode
To add a user account to your VIA Connect database:
1. Click User Management on the Gateway Management Pages navigation pane.
The User List page appears.
2. Click Add User.
The Add User pane appears.
3. Type the new Username, Password and Confirm Password.
4. Under User Role, select from the following administrative levels:
▪ Web Administrator – Access to change all system settings, including Digital
Signage.
▪ Digital Signage – Able to configure the Digital Signage only (see
Signage
5. Select one of the following participation levels:
These options are enabled only when Moderator Mode is enabled (see
on page 26).
▪ Moderator – User is able to become a moderator and has access to moderator
features (see
▪ Participant – User can join a meeting as a participant but cannot access moderator
features.
6. Click Save.
A new user is added, and the User List tab appears with the new user added to the list.

Managing Network Settings

VIA Connect enables you to do the following:
▪
Changing Device IP Address
▪
Setting Up Secure Wireless Guest Access Point
▪
Connecting VIA Connect to Network Wirelessly
▪
Uploading an SSL Certificate (see
VIA Connect – For Web Administrator: Configuring Settings – Gateway Management Pages
on page 9) and, when your
on page 26), a user account is required to join a VIA meeting.
on page 34).
Becoming Meeting Moderator
on page 12.
VIA Connect
on page 71 ) .
on page 12.
on page 13.
Certificate on page 29).
Kramer Electronics Ltd.
VIA Connect
Logging
is in Database
Configuring Digital
Moderator Mode
11