For Installer: Connecting Via Connect; Connecting Main Display - Kramer VIA Connect PRO User Manual

Presentation & collaboration device

Hide thumbs Also See for VIA Connect PRO:

Table of Contents

For Installer: Connecting VIA

Connect

Always switch off the power to each device before connecting it to your

connecting your

device.

The main display is the screen connected directly to

booted up, the VIA gateway screen appears on the main display. All collaboration activity is

then displayed here.

▪

HDMI – The HDMI OUT Connector

direct-view display, such as an LCD monitor. This connection can be routed and

switched.

Connect's internal video card reads the EDID (Extended Display Identification Data) for

VIA

any connected display and sets the optimum display resolution and image refresh rate

automatically through the display connectors.

VIA Connect – For Installer: Connecting VIA Connect

VIA

Connect, connect its power and then switch on the power to each

VIA

Connect. When

connects to any compatible projection or

Kramer Electronics Ltd.

VIA

Connect. After

VIA Connect

Table of Contents

Need help?

Do you have a question about the VIA Connect PRO and is the answer not in the manual?

Via connect plus Via campus2 Via campus2 plus