Converter Location Setting; Redundant Backup Setting - TRENDnet TFC-1600MM User Manual

Management module

Hide thumbs Also See for TFC-1600MM:

Specifications (1 page)

Configuration manual (18 pages)

Table Of Contents

Table of Contents

TRENDnet User's Guide

Converter Location Setting

Allocating each slot's location in order to remember in where each slot was connected.

Redundant Backup Setting

The redundant function is to change the master line to the slave line in case of the linking fails happen.

The Redundant functions were set fixed, the master slot is slot 1(odd number slot) and the slave slot is slot 2(even number slot), and there are eight redundant groups in all. The "Act"

will indicate what slot is active.

When Master slot link fail, slave slot will be enabled. When the slave slot is activated, we need to transfer again to the master slot, and we need to check the "Restart" box on the group

then click "Save" button.

The redundant function depends only on some Smart Media Converters.