When Pointing The Projector Up - Canon ReallS SX80 User Manual

■ When Pointing the Projector Up

When the screen is placed on a higher position, point the projector up using the adjust-
able foot.
You can point it up as far as 10 degrees.
The keystone distortion of the projecting image can be corrected with the auto keystone
(P45) or by using the keystone distortion adjust function (P53).
1
Lift the front side of the projector and
push the adjusting foot lock button to
extend the adjustable foot.
2
Raise the image to the desired height
angle, then release the button to lock
the foot in place.
If Keystone Distortion is Too Large
If the keystone distortion is too large to adjust, adjust the projector height by, for
example, placing it on a pedestal.
Keystone Distortion
33
Setting Up the Projector
Pedestal