Maintenance; Cleaning The Projector - Canon ReallS SX80 User Manual

Maintenance

Cleaning the Projector

Clean the projector frequently to prevent dust from settling on the surface.
A dirty lens may ruin the quality of the projected image.
• The main unit is very hot immediately after turning off the projector. Wait until the projector
cools down sufficiently (more than 1 hour) before cleaning the projector. Otherwise, you may
get burned or injured.
Caution
• Before cleaning the projector, be sure to remove the power plug from the AC outlet. Other-
wise, electric shock or fire may result.
Wipe the projector's main unit softly with a soft cloth.
If the projector is heavily soiled, soak the cloth in water with a small amount of detergent
in it, squeeze the cloth very well, and then wipe the projector with it. After cleaning, wipe
the projector with a dry cloth.
• Never use volatile cleaning liquid or benzine, as these may damage the finish of the pro-
jector.
• When using a chemical dust cloth, make sure to read the instructions thoroughly.
• When cleaning the projector's lens, use a commonly available air blower or lens cleaning
paper. The lens surface is easily damaged, so do not use a hard cloth or tissues.
When Not Used for an Extended Period of Time
Be sure to attach the lens cap on the lens and store in the supplied carrying bag.
127