Setting Display Status; Selecting An Image Projection Mode - Canon ReallS SX80 User Manual

Canon realls sx80: user guide
Table of Contents

Advertisement

Setting Display Status

Selecting an Image Projection Mode

[Aspect]
HDMI
DIGITAL PC
ANALOG PC
Aspect
You can select a projection mode corre-
sponding to the aspect ratio of image.
• Different contents are displayed for dif-
ferent screen aspects or input signal
types.
• The ASPECT button on the remote con-
trol can also be used to select the
Aspect settings.
Auto
An image is projected at an aspect
ratio of the input signal. Select this
mode for normal image projection.
4:3
An image is projected at an aspect
ratio of 4:3. Select this to project
computer screen images having a
resolution lower than SXGA+ (VGA,
SVGA or XGA) over the entire screen.
16:9
An image is projected at an aspect
ratio of 16:9. Select this when visual
software having aspect ration or 16:9
cannot be correctly projected in the
Auto mode.
COMPONENT
VIDEO/S-VIDEO
USB
Display settings
Press the OK button to accept your setting
and then press the MENU button.
73
Zoom
An image with 4:3 aspect ratio is pro-
jected in the center of the screen
enlarged in 16:9 aspect ratio with the
upper and lower portion of the image
cut off. Select this when projecting
visual software having aspect ratio of
4:3 and black belts at the top and
bottom of the image.
• When you select [16:9] or[16:9 D
image shift] for [Screen aspect],
[Zoom] appears if the type of input
signal is [HDMI], [COMPONENT],
[VIDEO], or [S-VIDEO].
True size An image is projected with the origi-
nal resolution of the input signal.
Select this to clearly project com-
puter screen images having a resolu-
tion SXGA+ or lower (VGA, SVGA,
XGA or SXGA) or visual software hav-
ing a resolution lower than 1035i.
• This mode is available when you
select [ANALOG PC-1], [ANALOG
PC-2], [DIGITAL PC], [HDMI
(720p, 576p, 480p)] or [COMPO-
NENT (720p, 576p, 480p)] for
input signal.
• It is not available for an image hav-
ing a resolution higher than
SXGA+ or visual software having a
resolution of 1080i, 1080p, 1035i,
576i or 480i.
• [Auto] and [True size] are not available
if the input signal type is [VIDEO].
• [Auto] is automatically selected if the
input signal type is [USB].

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sx80 - realis sxga+ lcos projector2677b002Sx80

Table of Contents