Registering A Password; Resetting The Lamp Counter - Canon ReallS SX80 User Manual

Setting Various Function

Registering a Password

[Other settings] - [Register password]
HDMI
DIGITAL PC
ANALOG PC
Other settings
Register password
You can register a password for starting
projection.
Press the OK button after selecting [Reg-
ister password], and the following screen
for registering a password appears:
Enter a 4-digit password using [ ] / [<] /
[ ] / [>] (e.g., , <<<<,
The 4-digit password is entered from the
left to right digits, the password is auto-
matically registered.
• Press the MENU button to abort the reg-
istration.

Resetting the Lamp Counter

[Other settings] - [Lamp counter]
COMPONENT
VIDEO/S-VIDEO
USB
System settings
You can reset the lamp counter that indi-
cates the timing to replace the projector
when you replace it.
Press the OK button after selecting [Lamp
counter], and the lamp counter is dis-
played. Select the [Reset] and press the
OK button.
<>).
Select [OK] on the screen for confirmation,
press the OK button, and the lamp counter
is reset.
Press the MENU button.
98
HDMI
DIGITAL PC
ANALOG PC
Other settings
Lamp counter
Do not reset the lamp counter except
when you have replaced the lamp. Oth-
erwise, the lamp counter cannot indi-
cate the correct timing for replacing the
lamp. For the details of the lamp
replacement, refer to the page 130.
COMPONENT
VIDEO/S-VIDEO
USB
System settings